Tampa Home Inspector - Divinity Inspection Service, LLC


Tampa Bay Home Inspector Ludwig Maxwell  Tampa Home & Commercial Building Inspector for the Tampa Bay area including Brandon, Valrico, Plant City area providing Full Home Inspections Service, Wind Mitigation, 4 Point Inspections,  and Manufactured Home inspections. Divinity Inspection Service, LLC is a full time Inspections company with a Supra key access which operates under State of Florida license as Home & Commercail Inspections #4993. (STATE CERTIFIED Home Inspector License # 4993) The Company is also a member of the National Society of Home Inspectors and International Association of Certified Home Inspectors (InterNACHI) # 12011002 As one of your local TBA (Tampa Bay of InterNACHI Board member) This means that I have met the highest standards in our industry and have provided professional service in the Tampa Bay Area. We also have two inspector in the BNI chapter, one Wesley Chapel and the other one in Spring Hill BNI Chapter.

Certified by the International Association of Certified Home Inspectors$10,000 Honor Guarantee, Backed by InterNACHI

 
 With the knowledge and understand for the many different type of system for their components that is in need to make up a hole home. This ability to relay this information to the homeowner has increased the life expectancy and lowered the overall maintenance cost for the homeowner.

  Our emphasis is not necessarily based upon "code compliance", which in actuality sets minimum standards, but rather is concerned with whether a system or component is installed or performing according to published industry and/or manufacturer's specifications. Because of the volume of inspections behind us and the many continuing education seminars that we have attended, our ability to perform thorough inspections exceeds that of most other inspection companies.

 Our clients are encouraged to attend the inspection. By doing so they will have a better understanding of the conditions of the home that they are buying - what is normal wear & tear and what may have need for repair or correction. Most of our clients, many from the home construction trades, express surprise at the number of components that are reviewed in the inspection - aspects that they would not have considered for evaluation.

The inspection report is provided at the conclusion of the inspection. If for any reason our clients have a question, we ask that they call us, whether this is for a clarification on the report, routine maintenance or even for "how to" inquiries. We believe that a client's ability to make sound decisions is largely based upon the information contained in the report and the inspection itself.

Please take the time to look through our web site. We've included a wealth of information which will help you better understand the ins and outs of home inspection, and we hope this information will be useful to you.

We here at Divinity Inspection Service, LLC want to take this opertunity to say THANK YOU for your time and have a great day!







Get a free Home Inspection QuickQuote from us today by completing the form below.

Quote subject to change upon visual examination of the property to be inspected.


Your Name

Your Telephone Number

Your Email Address

Property Sq.Ft. to be inspected (Ex: 1,970 sq. ft.)

Year that property was built (Ex: 1987)

URL where we can see online images of property

Known damage and defects (Ex: Water leak in chimney)

Any additional information that you can provide

You will be required to enter a USERNAME and PASSWORD to prove you are human. You will only be required to do this ONCE during your current visit our Website.


Username:
clock


  Password:
timber




ACCESS YOUR INSPECTION REPORT

Your report will remain on the server for one year of the date posted!


User Name
Password
Lost Password?


  • Teflon is the trademarked name for DuPont's Polytetrafluoroethylene (PTFE). It is the slipperiest substance known to man. DuPont studies show that the Teflon offgases toxic particulates at 446°F. At 680°F Teflon pans release at least six toxic gases, including two carcinogens, two global pollutants, and MFA, a chemical lethal to humans at low doses. At temperatures that DuPont scientists claim are reached on stovetop drip pans (1000°F), non-stick coatings break down to a chemical warfare agent known as PFIB, and a chemical analog of the WWII nerve gas phosgene.
  • Particleboard is cheaper, denser and more uniform than conventional wood and plywood and is substituted for them when appearance and strength are less important than cost. However, particleboard can be made more attractive by painting or the use of wood veneers that are glued onto surfaces that will be visible. Though it is denser than conventional wood, it is the lightest and weakest type of fiberboard, except for insulation board. Medium-density fibreboard and hardboard, also called high-density fiberboard, are stronger and denser than particleboard.
  • To build an average 2000 square foot home, it would require 26,700 board feet of lumber! One 20 inch, 42 foot long tree will produce about 260 board feet. So if you are building this 2000 square foot home, it will take 102 trees. (Keep in mind that this does not include any wood required for furnishings or cabinetry in some cases.)
  • Argentine ants are ranked among the world's 100 worst animal invaders. In its introduced range, the Argentine ant often displaces most or all native ants. This can, in turn, imperil other species in the ecosystem, such as native plants that depend on native ants for seed dispersal, or lizards that depend on native ants for food. For example, the recent severe decline in coastal horned lizards in southern California is closely tied to Argentine ants displacing native ant species on which the lizards feed.
  • Polyurethane is an incredibly resilient, flexible, and durable manufactured material that can take the place of paint, cotton, rubber, metal, and wood in thousands of applications across all fields. Polyurethane might be hard, like fiberglass, squishy like upholstery foam, protective like varnish, bouncy like rubber wheels, or sticky like glue. Since its invention in the 40s, polyurethane has been used in everything from baby toys to airplane wings, and continues to be adapted for contemporary technology.
  • The castor bean plant is one of the deadliest of all plants. Eat a single castor bean, or perhaps two if you're an adult, and you'll die — maybe. If you live beyond five days, you will probably survive. Castor beans (seeds) contain a poison, called ricin, which works by preventing cells from making proteins. Cells die without the proteins, and the resulting damage to the body can be great enough to kill a person. More ominous: ricin is part of the mash left over from making castor oil from the beans, and can be used to deliberately poison people. A 500-microgram dose (about the size of a pin head) is enough to do the job if injected or inhaled.
  • To properly de-ice a windshield, turn the vehicle's heat level to high and the defroster fan level to low. This low setting is extremely important'you don't want to crack the windshield by heating it too quickly. Apply a deicing solution to your windshield, using a spray bottle. Home remedies include the following mixtures: 50 percent water and 50 percent ethyl alcohol, or 50 percent water and 50 percent vinegar. Use a plastic scraper or spatula.
  • Because photosynthesis performed by fuel crops removes greenhouse gases from the atmosphere and can reduce fossil fuel consumption, we are told they are green. But when the full lifecycle of biofuels is considered, from land clearing to consumption, the moderate emission savings are outweighed by far greater emissions from deforestation, burning, peat drainage, cultivation and soil-carbon losses. Every ton of palm oil generates 33 tons of carbon dioxide emissions - 10 times more than petroleum. Tropical forests cleared for sugar cane ethanol emit 50 percent more greenhouse gases than the production and use of the same amount of gasoline.
  • The bacterium Caulobacter crescentus uses the toughest glue on Earth to stick to river rocks, and now scientists are trying to figure out how to produce the stuff. The adhesive can withstand an enormous amount of stress, equal to the force felt by a quarter with more than three cars piled on top of it. That’s two to three times more force than the best retail glues can handle. But making it has proved challenging. Like a mess of chewing gum, the gunk globs to everything, including the tools used to create it!
  • HEPA filters can remove at least 99.97% of airborne particles 0.3 micrometers (µm) in diameter. Particles of this size are the most difficult to filter and are thus considered the most penetrating particle size (MPPS). HEPA filters are composed of a mat of randomly arranged fibres. Key metrics affecting function are fibre density and diameter, and filter thickness. The common assumption that a HEPA filter acts like a sieve where particles smaller than the largest opening can pass through is incorrect. Just as for membrane filters, particles so large that they are as wide as the largest opening or distance between fibres cannot pass in between them at all.
  • Potassium iodide is added as a nutrient, to prevent goiter, a thyroid gland problem caused by lack of iodine, and to prevent mental retardation associated with iodine deficiency. A project started by the Michigan State Medical Society in 1924 promoted the addition of iodine to table salt, and by the mid 1950's, three quarters of U.S. households used only iodized salt. Potassium iodide makes up 0.06% to 0.01% of table salt by weight. Sometimes cuprous iodide (iodide of copper) is used as the source of iodine.
  • Bioplastics are a new generation of biodegradable and compostable plastics. They are derived from renewable raw materials like starch (e.g. corn, potato, tapioca etc), cellulose, soy protein, lactic acid etc., not hazardous in production and decompose back into carbon dioxide, water, biomass etc. when discarded. Corn starch is currently the main raw material being used in the manufacture of bioplastic resins. Mater-Bi (main component corn-starch), and PolyActide (PLA) (made from corn-starch as well) are currently the 2 main resins (raw materials), being used today in the production of compostable & biodegradable plastics and are certified for compostability under standards set by international organizations.
  • One kilowatt-hour (kWh) equals the amount of electricity needed to burn a 100 watt light bulb for 10 hours. A 1 kilowatt home solar system installed costs about US$9000 (before any rebate programs). Prices up to $15,000 are also possible as are lower prices depending upon (a) the kind of PV System, (b) country of purchase ,(c) how the system is purchased, and (d) the surface to which the system is attached.

HOME TIP
Control Basic Home Energy Usage

Study your family's lighting needs and use patterns, paying special attention to high-use areas such as the living room, kitchen, and outside lighting. Look for ways to use lighting controls—like occupancy sensors, dimmers, or timers—to reduce lighting energy use, and replace standard (incandescent) light bulbs and fixtures with compact or standard fluorescent lamps.

BACK TO TOP Terms of Service
HOME
BACK TO TOP

Florida Home Inspector | Tampa Home Inspector | Tampa Bay Home Inspector | New Tampa Home Inspector | South Tampa Home Inspector | St. Petersburg Home Inspector
Hillsborough Bay Home Inspector | Town 'N' County Home Inspector Egypt Lake-Leto Home Inspector | Temple Terrace Home Inspector | Clearwater Home Inspector | Largo Home Inspector
Pinellas Park Home Inspector | Apollo Beach Home Inspector| Brandon Home Inspector | Wesley Chapel Home Inspector | Greater Northdale Home Inspector | East Lake Home Inspector
Palm Harbor Home Inspector | Tarpon Springs Home Inspector | West and East Lealman Home Inspector | Wesley Chapel Home Inspector | New Port Richey Home Inspector | Odessa Home Inspector | Largo Home Inspector | Bradenton Home Inspector | Plant City Home Inspector | Spring Hill Home Inspector | Hillsborough County Home Inspector | Pinellas County Home Inspector


Website Template © 2011 CommercialNet, Inc.
Website Content © 2011 Divinity Inspection Service, LLC
ALL RIGHTS RESERVED |

Login Link